Petronas Syntium 7000 RN 0W-20
Petronas Syntium 7000 RN 0W-20 - perfectly absorbing excess heat from the engine, low viscosity - 0w20, synthetic engine oil, has ACEA classification C5. Recommended for engines requiring car manufacturers' standards: Renault: RN17 FE. Developed for cars with exhaust aftertreatment systems.
Applications
- Petronas Syntium 7000 RN 0W-20 is perfect for diesel and gasoline units with installed DPF filters or TWC catalysts where the manufacturer requires classification C5 and viscosity 0w20.
Benefits Petronas Syntium 7000 RN 0W-20
- The synthetic bases used offer much better lubricating parameters compared to mineral bases.
- Effectively reduces friction from the first moments of a cold engine start, even at extremely low temperatures.
- The oil with a very high viscosity index provides very effective protection even under severe conditions.
- Very effectively eliminates acids resulting from fuel combustion - this is due to the high alkaline number.
- Petronas Syntium 7000 RN 0W-20 compliant with manufacturers' standards:Renault: RN17 FE
- Petronas Syntium 7000 RN 0W-20 is perfectly absorbing excess heat from the engine
Technology Petronas Syntium 7000 RN 0W-20
Petronas Syntium 7000 RN 0W-20 from the Syntium 7000 line is a synthetic oil with excellent technical parameters. Syntium 7000 oils are developed using CoolTechTM technology. It is a technology that is set to control the heat of the oil. One of the tasks of each oil is to collect heat and transfer it to the cooling system. Thanks to the CoolTechTM technology, Syntium 7000 oils perform this task perfectly. Lower engine and oil operating temperatures reduce the rate of its aging, and thus the loss of its original protective properties. Optimum engine operating temperature also maximizes engine performance and reduces fuel consumption. Syntium 7000 oils effectively reduce the formation of deposits in the engine, which can cause accelerated engine wear and reduce its efficiency. A very important feature of these oils is also perfect lubrication, protecting against improper wear of such sensitive elements as valves or cylinder walls. Syntium 7000 oils are suitable for naturally aspirated and turbocharged engines with gasoline direct injection and operating in demanding conditions.Data sheet
- Ash, Sulphated
- 0.7/% wt – ASTM D874
- Density @ 15C, Relative
- 0.845/g/ml - ASTM D4052
- Flash Point, PMCC
- 226/°C - ASTM D9230
- Pour Point
- -51/°C - ASTM D97
- Quality
- synthetic
- TBN
- 9.25/mg – KOH/g – ASTM D2896
- Viscosity
- 0w20
- Viscosity index
- 180/ASTM D2270
- Viscosity, CCS -35C
- 5760/mPa*s - ASTM D5293
- Viscosity, Kinematic 100C
- 8.35/mm²/s - ASTM D445