Ravenol RNF SAE 0W-20 CleanSynto
Ravenol RNF SAE 0W-20 CleanSynto - specially developed for engines designed by Renault, low viscosity - 0w20, synthetic engine oil, has ACEA classification C5. Has or meets the standards of car manufacturers: Renault: RN 17FE. Its composition is adapted to engines equipped with DPF filters.
Applications
- Ravenol RNF SAE 0W-20 CleanSynto can be used for lubrication diesel and gasoline engines with particulate filters such as DPF and 3-way catalytic converters where the manufacturer requires classification C5 and viscosity 0w20.
- It has parameters that meet the requirements of Renault engines where the RN 17FE standard is recommended.
Benefits Ravenol RNF SAE 0W-20 CleanSynto
- High lubricating parameters were obtained through the production of oil from synthetic oil bases.
- Effectively facilitates starting a cold engine during extreme frosts thanks to its high pumpability.
- The advantage of the oil is a very high viscosity index, which means better protection of the engine in difficult working conditions.
- The high content of detergents neutralizes acidic products of combustion for a very long time.
- Ravenol RNF SAE 0W-20 CleanSynto meets the standards of manufacturers:Renault: RN 17FE
- Ravenol RNF SAE 0W-20 CleanSynto is specially developed for engines designed by Renault
Technology Ravenol RNF SAE 0W-20 CleanSynto
Ravenol RNF SAE 0W-20 CleanSynto uses the highest quality oil bases and a special set of additives. Clean Synto oils contain increased amounts of antioxidant, washing and dispersing additives. These additives cause that significantly less deposits and soot deposits are deposited in the engine, but also existing impurities are naturalized. The increased amount of additives allows the oil to extend its effective lubrication level before it loses its properties. All this allows you to ensure hundreds of thousands of kilometers driven without problems with the engine.Data sheet
- Ash, Sulphated
- 0.79/% wt – DIN 51 575
- Density @ 20C, Relative
- 0.841/g/cm3 - EN ISO 12185
- Flash Point, PMCC
- 232/°C – DIN ISO 2592
- Pour Point
- -48/°C - DIN ISO 3016
- Quality
- synthetic
- TBN
- 8.7/mg – KOH/g - DIN ISO 3771
- Viscosity
- 0w20
- Viscosity at -30 °C (CCS)
- 4800/mPa*s - ASTM D5293
- Viscosity index
- 199/DIN ISO 2909
- Viscosity, Kinematic 100C
- 8.3/mm²/s - DIN 51 562
- Viscosity, Kinematic 40C
- 38.8/mm2/s - DIN 51 562