Millers oils XF Premium C3 RN 5w30
Millers oils XF Premium C3 RN 5w30 - especially recommended for selected Renault engines, synthetic engine oil, has ACEA classification C3. Developed for engines requiring the following specifications: Renault: RN 17. Designed for use in engines with DPF or TWC filters.
Applications
- Millers oils XF Premium C3 RN 5w30 is adapted to diesel and gasoline units with DPF or 3-functional catalysts where classification is required C3 and viscosity 5w30.
- Adapted to selected Renault engines where the Renault standard: RN 17 is recommended.
Benefits Millers oils XF Premium C3 RN 5w30
- Synthetic bases significantly improve the lubricating parameters of the oil.
- Perfectly protects critical engine parts during start-up, even at very low temperatures.
- The high base number allows to reduce the acids resulting from the combustion of fuel
- Millers oils XF Premium C3 RN 5w30 compliant with manufacturers' standards:Renault: RN 17
- Millers oils XF Premium C3 RN 5w30 is especially recommended for selected Renault engines
Technology Millers oils XF Premium C3 RN 5w30
Millers oils XF Premium C3 RN 5w30 from the range of Millers Oils XF PREMIUM engine oils, which are produced in Dynamic Fluid Technology (DFT). This technology is a combination of synthetic base oils and special performance enhancing additives. The DFT technology places special emphasis on protecting the engine during cold start at sub-zero temperatures. A cold engine start is critical because metal-to-metal friction can occur after prolonged idle time before the oil is distributed throughout the engine. Millers Oils XF PREMIUM oils with DFT technology reduce this time without protection to a minimum. Of course, Millers Oils XF PREMIUM oils effectively protect the engine also when it is operated at higher operating temperatures. DFT technology provides this enhanced protection because it is active from the moment the engine is started right up to operating conditions where the oil temperature can exceed 100°C. Millers Oils XF PREMIUM oils also have increased resistance to oxidation, which limits their degradation, reduces the amount of deposits and allows to maintain optimal viscosity for a longer time.Data sheet
- Density @ 20C, Relative
- 0.853/g/cm3 - EN ISO 12185
- Flash Point, PMCC
- 230/°C – DIN ISO 2592
- HTHS at 150°C
- 3.5/mPа.s - ASTM D5481
- Pour Point
- -42/°C - DIN ISO 3014
- Quality
- synthetic
- TBN
- 8.5/mg – KOH/g - DIN ISO 3771
- Viscosity
- 5w30
- Viscosity index
- 164/DIN ISO 2909
- Viscosity, Kinematic 100C
- 11.6/mm²/s - DIN 51 562
- Viscosity, Kinematic 40C
- 69/mm2/s - DIN 51 562