Repsol Elite Evolution C4 5W-30
Repsol Elite Evolution C4 5W-30 - synthetic engine oil, has ACEA classification C3, C4. Meets the requirements of car manufacturers' specifications: MB 229.51/226.51, Renault: RN0720. Designed for use in engines with DPF or TWC filters.
Applications
- Repsol Elite Evolution C4 5W-30 is adapted to diesel and gasoline engines with particulate filters such as DPF or three-way catalysts TWC where the ACEA standard is required C3, C4 and viscosity 5w30.
Benefits Repsol Elite Evolution C4 5W-30
- The use of synthetic base oils greatly improved technical parameters compared to mineral base oils.
- Fluidity at very low temperatures will facilitate cold start and provide effective protection in the most severe frosts.
- The oil is stable at high temperatures, thanks to which it provides the right level of protection against friction in all conditions.
- The alkaline additives contained in the composition of the oil help to neutralize the acids resulting from fuel combustion.
- Repsol Elite Evolution C4 5W-30 meets the standards of manufacturers:MB 229.51/226.51, Renault: RN0720
Technology Repsol Elite Evolution C4 5W-30
Repsol Elite Evolution C4 5W-30 from the Elite range is a high-quality passenger car engine oil made from synthetic base oils and advanced additives. Repsol Elite oils have a wide range of engine manufacturer approvals, allowing them to be used in a wide range of vehicles. They provide maximum protection against friction, and at the same time allow you to reduce fuel consumption. Elite group oils with the note Evolution have a reduced content of sulfur, phosphorus and ash (MID SAPS or LOW SAPS), which makes them safer for particulate filters such as DPF or GPF. Repsol Elite oils are compliant with environmental regulations, which means they have less of a negative impact on the environment.Data sheet
- Density @ 15C, Relative
- 0.850/g/ml - ASTM D4052
- Flash Point, PMCC
- 200/°C - ASTM D9246
- Pour Point
- -45/°C - ASTM D97
- Quality
- synthetic
- TBN
- 8.2/mg – KOH/g – ASTM D2896
- Viscosity
- 5w30
- Viscosity at -30 °C (CCS)
- 6600/mPa*s – ASTM D5293
- Viscosity index
- 168/ASTM D2270
- Viscosity, Kinematic 100C
- 12.2/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 71/mm²/s - ASTM D445