Repsol Master Eco V 0W-20
Repsol Master Eco V 0W-20 - created especially for selected cars of the Volkswagen AG and Porsche groups, low viscosity - 0w20, synthetic engine oil, has ACEA classification A1/B1. For use where car manufacturer standards are required: VW 508.00/509.00, Porsche: C20.
Applications
- Repsol Master Eco V 0W-20 has a formula that complies with the requirements diesel and gasoline engines where manufacturers require a standard A1/B1 and viscosity 0w20.
- Specially developed for selected cars of the Volkswagen AG and Porsche groups, where the recommended oil standard is VW 508.00/509.00, Porsche: C20.
Benefits Repsol Master Eco V 0W-20
- The formation of oil deposits has been effectively reduced thanks to the use of synthetic base oils.
- The oil retains its fluidity even at very low temperatures, thanks to which it provides engine protection during start-up in severe frost.
- The oil provides engine protection even in severe operating conditions such as extreme temperatures, because it has a high viscosity index.
- High base number provides long protection against acids.
- The special mid-SAPS formula allows you to extend the life of the DPF filter.
- Reduced need to add oil thanks to low NOACK.
- Repsol Master Eco V 0W-20 compatible with manufacturers' standards:VW 508.00/509.00, Porsche: C20
- Repsol Master Eco V 0W-20 is created especially for selected cars of the Volkswagen AG and Porsche groups
Technology Repsol Master Eco V 0W-20
Repsol Master Eco V 0W-20 from the most efficient group of Master engine oils produced by Repsol. Engine oils from the Master line are produced in a technology that is among the world's leading in terms of innovation. Master oils are made of fully synthetic oil bases and selected enriching additives. Their carefully developed formula is the merit of the experience gained by racing teams. These oils are recommended for high-powered vehicles that are used daily, also in difficult operating conditions, such as driving in traffic jams or fast highway driving. Master oils provide perfect engine protection against friction and the formation of deposits, and at the same time enable greater fuel economy compared to traditional lubricants.Data sheet
- Ash, Sulphated
- 0.8/% wt – ASTM D874
- Density @ 15C, Relative
- 0.844/g/ml - ASTM D4052
- Flash Point, PMCC
- 209/°C - ASTM D9238
- NOACK
- 10/% - CEC L40-93
- Pour Point
- -57/°C - ASTM D97
- Quality
- synthetic
- TBN
- 7.8/mg – KOH/g – ASTM D2896
- Viscosity
- 0w20
- Viscosity index
- 177/ASTM D2270
- Viscosity, CCS -35C
- 6200/mPa*s – ASTM D5293
- Viscosity, Kinematic 100C
- 8.1/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 41.1/mm²/s - ASTM D445