Eneos ULTRA-V 0W-20
Eneos ULTRA-V 0W-20 - complies with Volkswagen and Porsche quality standards, low viscosity - 0w20, synthetic engine oil. Meets the standards of car manufacturers: VW 508.00/509.00, Porsche: C20.
Applications
- For use in engines where Volkswagen and Porsche quality standards are required (VW 508.00/509.00, Porsche: C20).
Benefits Eneos ULTRA-V 0W-20
- The formation of oil deposits has been effectively reduced thanks to the use of synthetic base oils.
- The oil retains its fluidity even at very low temperatures, which is invaluable during winter engine start-up.
- The oil provides engine protection even in very difficult operating conditions such as extreme temperatures, because it has a very high viscosity index.
- Effective protection against rust is obtained by enriching the oil with detergents that neutralize acidic combustion products.
- Eneos ULTRA-V 0W-20 compatible with manufacturers specifications:VW 508.00/509.00, Porsche: C20
- Eneos ULTRA-V 0W-20 is complies with Volkswagen and Porsche quality standards
Technology Eneos ULTRA-V 0W-20
Eneos ULTRA-V 0W-20 from the Eneos Ultra family is a modern fully synthetic oil. The oils from the Eneos Ultra family are characterized by high efficiency, which is due to synthetic bases and a special package of additives from which they are produced. Advanced production technology allows you to obtain a clean oil base that is extremely resistant to high temperatures. In combination with washing additives, Eneos Ultra oils allow you to keep the engine clean, including pistons, at a very high level. In addition to ensuring exceptional cleanliness, Eneos Ultra oils perfectly protect the engine against friction, which results in extending its durability. Perfect lubrication also improves engine performance and reduces fuel consumption. Another important feature of these oils is high fluidity at low temperatures, thanks to which starting the engine is easier, especially in winter conditions. Eneos Ultra oils have been specially developed to meet the specific requirements of many engine manufacturers.Data sheet
- Density @ 15C, Relative
- 0.835/g/ml - ASTM D4052
- Flash Point, PMCC
- 236/°C - ASTM D9233
- HTHS at 150°C
- 2.6/mP?.s - ASTM D5481
- Pour Point
- -54/°C - ASTM D97
- Quality
- synthetic
- TBN
- 7.75/mg – KOH/g – ASTM D2896
- Viscosity
- 0w20
- Viscosity index
- 188/ASTM D2270
- Viscosity, Kinematic 100C
- 8.0/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 40.8/mm²/s - ASTM D445