Petronas Syntium 7000 AV 0W-20
Petronas Syntium 7000 AV 0W-20 - technologically advanced with the use of CoolTechTM, low viscosity - 0w20, synthetic engine oil, has ACEA classification C5, has API SN+. For use where car manufacturer standards are required: VW 508.00/509.00, Porsche: C20. Reduces the wear rate of DPF filters.
Applications
- Petronas Syntium 7000 AV 0W-20 created to meet the requirements diesel and gasoline engines equipped with DPF or 3-way catalysts that require the ACEA standard C5 and viscosity 0w20.
Benefits Petronas Syntium 7000 AV 0W-20
- The high quality of the oil was obtained through the use of synthetic oil bases.
- The oil has a high viscosity index, which means that its high protective value is constant over a wide temperature range.
- Thanks to a very high base number, it allows to reduce more corrosive acids.
- Mid-SAPS oil, which means that the amount of ashes in its composition has been reduced to protect the DPF filter.
- Petronas Syntium 7000 AV 0W-20 meets the standards of manufacturers:VW 508.00/509.00, Porsche: C20
- Petronas Syntium 7000 AV 0W-20 is technologically advanced with the use of CoolTechTM
Technology Petronas Syntium 7000 AV 0W-20
Petronas Syntium 7000 AV 0W-20 from the Syntium 7000 line is a synthetic oil with excellent technical parameters. Syntium 7000 oils are developed using CoolTechTM technology. It is a technology that is set to control the heat of the oil. One of the tasks of each oil is to collect heat and transfer it to the cooling system. Thanks to the CoolTechTM technology, Syntium 7000 oils perform this task perfectly. Lower engine and oil operating temperatures reduce the rate of its aging, and thus the loss of its original protective properties. Optimum engine operating temperature also maximizes engine performance and reduces fuel consumption. Syntium 7000 oils effectively reduce the formation of deposits in the engine, which can cause accelerated engine wear and reduce its efficiency. A very important feature of these oils is also perfect lubrication, protecting against improper wear of such sensitive elements as valves or cylinder walls. Syntium 7000 oils are suitable for naturally aspirated and turbocharged engines with gasoline direct injection and operating in demanding conditions.Data sheet
- Ash, Sulphated
- 0.8/% wt – ASTM D874
- Density @ 15C, Relative
- 0.842/g/ml - ASTM D4052
- Flash Point, PMCC
- 230/°C - ASTM D9230
- Pour Point
- -27/°C - ASTM D97
- Quality
- synthetic
- TBN
- 9.5/mg – KOH/g – ASTM D2896
- Viscosity
- 0w20
- Viscosity index
- 177/ASTM D2270
- Viscosity, CCS -35C
- 5468/mPa*s - ASTM D5293
- Viscosity, Kinematic 100C
- 8.14/mm²/s - ASTM D445