Motul 8100 Exo-Lite 5W-20
Motul 8100 Exo-Lite 5W-20 - effectively reducing fuel consumption with very low HTHS viscosity, low viscosity - 5w20, synthetic engine oil, has API SP-RC. Recommended where the specification of car manufacturers is required: GM: dexos1 Gen 2, FORD WSS-M2C930-A, FORD WSS-M2C945-A, FORD WSS-M2C945-B1, FIAT 9.55535-CR1, Chrysler: MS 6395.
Applications
- Recommended for engines where low HTHS viscosity is required.
Benefits Motul 8100 Exo-Lite 5W-20
- The use of synthetic base oils greatly improved technical parameters compared to mineral base oils.
- Perfectly protects critical engine parts during start-up, even at very low temperatures.
- The oil is stable at high temperatures, thanks to which it provides the right level of protection against friction in all conditions.
- Thanks to the high alkaline number, it provides long-term protection against acid residues from fuel combustion.
- Oil with a limited amount of sulphated ash - reduces the rate of DPF filter wear in cars equipped with it.
- Motul 8100 Exo-Lite 5W-20 compliant with manufacturers' standards:GM: dexos1 Gen 2, FORD WSS-M2C930-A, FORD WSS-M2C945-A, FORD WSS-M2C945-B1, FIAT 9.55535-CR1, Chrysler: MS 6395
- Motul 8100 Exo-Lite 5W-20 is effectively reducing fuel consumption with very low HTHS viscosity
Technology Motul 8100 Exo-Lite 5W-20
Motul 8100 Exo-Lite 5W-20 from 8100 series engine oils are highly valued fully synthetic lubricants which, thanks to their properties, meet the requirements of many engine manufacturers. 8100 oils provide a high level of engine protection against wear and deposit formation. The synthetic base oil is much more stable under heavy loads, making 8100 Series oils much better at protecting friction parts. On the other hand, resistance to high temperatures reduces oil oxidation, which reduces the formation of dangerous deposits and extends its life.Data sheet
- Ash, Sulphated
- 0.85/% wt - ASTM D874
- Density @ 20C, Relative
- 0.847/g/ml - ASTM D1298
- Flash Point, PMCC
- 236/°C - ASTM D92
- HTHS at 150°C
- 2.6/mPa.s - ASTM D4741
- Pour Point
- -42/°C - ASTM D97
- Quality
- synthetic
- TBN
- 8.5/mg – KOH/g
- Viscosity
- 5w20
- Viscosity index
- 170/ASTM D2270
- Viscosity, Kinematic 100C
- 8.5/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 44.7/mm²/s - ASTM D445