Amsoil Synthetic European Motor Oil 0w20 EZT
Amsoil Synthetic European Motor Oil 0w20 EZT - excellent for engines designed in Europe, low viscosity - 0w20, synthetic engine oil, has ACEA classification C5, has API SN+. Meets the specifications of car manufacturers: VW 508.00/509.00. It is adapted to work in engines equipped with DPF filters.
Applications
- Amsoil Synthetic European Motor Oil 0w20 EZT is adapted to diesel and gasoline engines with diesel particulate filters (DPF) or 3-way catalysts (3-way) TWC installed where the ACEA standard is recommended C5 and viscosity 0w20.
Benefits Amsoil Synthetic European Motor Oil 0w20 EZT
- The synthetic oil bases used in the oil are much more resistant to the loss of properties compared to mineral oils.
- Provides effective protection against friction in a wide range of temperatures (has a high viscosity index).
- Effectively protects the engine against corrosion caused by acids which are a loss of fuel combustion.
- Amsoil Synthetic European Motor Oil 0w20 EZT compatible with manufacturers' standards:VW 508.00/509.00
- Amsoil Synthetic European Motor Oil 0w20 EZT is excellent for engines designed in Europe
- Designed to prevent pre-ignition at low RPM.
Technology Amsoil Synthetic European Motor Oil 0w20 EZT
Amsoil Synthetic European Motor Oil 0w20 EZT from the Synthetic European Motor Oil line is a premium class oil produced from synthetic base oils. The Synthetic European Motor Oil line has been specially developed for engines produced by European car manufacturers. Their synthetic formula has been enhanced with special anti-wear additives. Synthetic European Motor Oil oils provide excellent engine protection against friction and the formation of deposits in it - they have high stability at high temperatures. These oils can be used at extended drain intervals. They are recommended for both gasoline and diesel engines, as well as hybrid drive systems. Thanks to the low pour point, it provides effective protection of the turbocharger at sub-zero temperatures.Data sheet
- Flash Point, PMCC
- 236/°C - ASTM D92
- HTHS at 150°C
- 2.7/mPа.s - ASTM D5481
- NOACK
- 8.9/% - ASTM D5800/b
- Pour Point
- -44/°C - ASTM D97
- Quality
- synthetic
- TBN
- 8.8/mg – KOH/g – ASTM D2896
- Viscosity
- 0w20
- Viscosity index
- 174/ASTM D2270
- Viscosity, CCS -35C
- 5501/mPa*s - ASTM D5293
- Viscosity, Kinematic 100C
- 8.2/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 42.2/mm²/s - ASTM D445