Millers oils XF Premium LSPI 5w30

Millers oils XF Premium LSPI 5w30 - formulated to prevent pre-ignition at low RPM, high quality synthetic engine oil, has API SP, SN+, ILSAC: ILSAC GF-6A, ILSAC GF-5, ILSAC GF-4. Meets the standards of car manufacturers: GM: Dexos1 Gen 2, GM 60694M, GM 4718M, Ford WSS-M2C-961-A1, Ford WSS-M2C-946-B1, Ford WSS-M2C-946-A, Ford WSS-M2C-929-A, Fiat 9.55535-CR1, Chrysler: MS-6395.

Benefits Millers oils XF Premium LSPI 5w30

  • High resistance to oxidation was obtained thanks to the use of synthetic oil bases.
  • Effectively facilitates the start of a cold engine during severe frosts thanks to its high pumpability.
  • Effectively eliminates acids resulting from fuel combustion - this is due to the high alkaline number.
  • Meets the high requirements of the ILSAC GF-6A specification, which was developed for engine oils.
  • Millers oils XF Premium LSPI 5w30 compatible with manufacturers' standards:GM: Dexos1 Gen 2, GM 60694M, GM 4718M, Ford WSS-M2C-961-A1, Ford WSS-M2C-946-B1, Ford WSS-M2C-946-A, Ford WSS-M2C-929-A, Fiat 9.55535-CR1, Chrysler: MS-6395
  • Millers oils XF Premium LSPI 5w30 is formulated to prevent pre-ignition at low RPM
  • Contains a formulation that protects the engine against pre-ignition at low speeds.

Technology Millers oils XF Premium LSPI 5w30

Millers oils XF Premium LSPI 5w30 from the range of Millers Oils XF PREMIUM engine oils, which are produced in Dynamic Fluid Technology (DFT). This technology is a combination of synthetic base oils and special performance enhancing additives. The DFT technology places special emphasis on protecting the engine during cold start at sub-zero temperatures. A cold engine start is critical because metal-to-metal friction can occur after prolonged idle time before the oil is distributed throughout the engine. Millers Oils XF PREMIUM oils with DFT technology reduce this time without protection to a minimum. Of course, Millers Oils XF PREMIUM oils effectively protect the engine also when it is operated at higher operating temperatures. DFT technology provides this enhanced protection because it is active from the moment the engine is started right up to operating conditions where the oil temperature can exceed 100°C. Millers Oils XF PREMIUM oils also have increased resistance to oxidation, which limits their degradation, reduces the amount of deposits and allows to maintain optimal viscosity for a longer time.
Millers Oils

Data sheet

Density @ 20C, Relative
0.845/g/cm3 - EN ISO 12185
Flash Point, PMCC
225/°C – DIN ISO 2592
HTHS at 150°C
2.9/mPа.s - ASTM D5481
Pour Point
-42/°C - DIN ISO 3014
Quality
synthetic
TBN
8/mg – KOH/g - DIN ISO 3771
Viscosity
5w30
Viscosity index
164/DIN ISO 2909
Viscosity, Kinematic 100C
10.7/mm²/s - DIN 51 562
Viscosity, Kinematic 40C
62/mm2/s - DIN 51 562

Millers oils XF Premium LSPI 5w30 oils contains or meets specification:

About the brand Millers Oils

On the foundations of the company purchased in 1887 by John Watson, Miller created the Millers-Oils enterprise, which to this day is an independent family business. Since the beginning of its existence, the company has been focusing on the quality and not the quantity of the products it... read more