Millers oils XF Premium C5 VW 0w20

Millers oils XF Premium C5 VW 0w20 - extremely effective in all, even extreme conditions, low viscosity - 0w20, synthetic engine oil, has ACEA classification C5. Meets specifications for engines requiring standards: VW 508 00 / 509 00, Porsche: C20. Reduces the wear rate of DPF filters.

Applications

  • Millers oils XF Premium C5 VW 0w20 designed for diesel and gasoline units equipped with particulate filters such as DPF and TWC catalytic converters where the manufacturer requires classification C5 and viscosity 0w20.

Benefits Millers oils XF Premium C5 VW 0w20

  • This oil is definitely more resistant to oxidation thanks to the use of synthetic oil bases.
  • It maintains optimal fluidity even at extremely low temperatures, thanks to which it effectively protects the engine during cold start.
  • It maintains optimum viscosity in a wide range of temperatures, thanks to which it protects the engine more effectively even in difficult operating conditions.
  • Thanks to a very high base number, it allows to reduce more corrosive acids.
  • Millers oils XF Premium C5 VW 0w20 compliant with manufacturers' standards:VW 508 00 / 509 00, Porsche: C20
  • Millers oils XF Premium C5 VW 0w20 is extremely effective in all, even extreme conditions

Technology Millers oils XF Premium C5 VW 0w20

Millers oils XF Premium C5 VW 0w20 from the range of Millers Oils XF PREMIUM engine oils, which are produced in Dynamic Fluid Technology (DFT). This technology is a combination of synthetic base oils and special performance enhancing additives. The DFT technology places special emphasis on protecting the engine during cold start at sub-zero temperatures. A cold engine start is critical because metal-to-metal friction can occur after prolonged idle time before the oil is distributed throughout the engine. Millers Oils XF PREMIUM oils with DFT technology reduce this time without protection to a minimum. Of course, Millers Oils XF PREMIUM oils effectively protect the engine also when it is operated at higher operating temperatures. DFT technology provides this enhanced protection because it is active from the moment the engine is started right up to operating conditions where the oil temperature can exceed 100°C. Millers Oils XF PREMIUM oils also have increased resistance to oxidation, which limits their degradation, reduces the amount of deposits and allows to maintain optimal viscosity for a longer time.
Millers Oils

Data sheet

Density @ 20C, Relative
0.844/g/cm3 - EN ISO 12185
Flash Point, PMCC
235/°C – DIN ISO 2592
HTHS at 150°C
2.7/mPа.s - ASTM D5481
Pour Point
-48/°C - DIN ISO 3014
Quality
synthetic
TBN
9/mg – KOH/g - DIN ISO 3771
Viscosity
0w20
Viscosity index
168/DIN ISO 2909
Viscosity, Kinematic 100C
8.4/mm²/s - DIN 51 562
Viscosity, Kinematic 40C
44.5/mm2/s - DIN 51 562

Millers oils XF Premium C5 VW 0w20 oils contains or meets specification:

About the brand Millers Oils

On the foundations of the company purchased in 1887 by John Watson, Miller created the Millers-Oils enterprise, which to this day is an independent family business. Since the beginning of its existence, the company has been focusing on the quality and not the quantity of the products it... read more