Millers oils XF Premium C4 5w30

Millers oils XF Premium C4 5w30 - extremely technologically advanced, synthetic engine oil, has ACEA classification C4. Formulated to meet the standards of car manufacturers: MB 226.51, MB 229.51, MB 229.31, Renault: RN 0720 , Fiat 9.55535-S4. Adapted to engines with DPF or TWC filters.

Applications

  • Millers oils XF Premium C4 5w30 meets the requirements gasoline and diesel units equipped with particulate filters where ACEA standard is required C4 and viscosity 5w30.

Benefits Millers oils XF Premium C4 5w30

  • The synthetic oil bases used in the oil are much more resistant to the loss of properties compared to mineral oils.
  • Effectively reduces friction from the very first moments of a cold engine start, even at very low temperatures.
  • Provides effective protection against friction in a wide range of temperatures (has a high viscosity index).
  • The oil provides good protection against corrosion caused by acids.
  • Millers oils XF Premium C4 5w30 compatible with manufacturers specifications:MB 226.51, MB 229.51, MB 229.31, Renault: RN 0720 , Fiat 9.55535-S4
  • Millers oils XF Premium C4 5w30 is extremely technologically advanced

Technology Millers oils XF Premium C4 5w30

Millers oils XF Premium C4 5w30 from the range of Millers Oils XF PREMIUM engine oils, which are produced in Dynamic Fluid Technology (DFT). This technology is a combination of synthetic base oils and special performance enhancing additives. The DFT technology places special emphasis on protecting the engine during cold start at sub-zero temperatures. A cold engine start is critical because metal-to-metal friction can occur after prolonged idle time before the oil is distributed throughout the engine. Millers Oils XF PREMIUM oils with DFT technology reduce this time without protection to a minimum. Of course, Millers Oils XF PREMIUM oils effectively protect the engine also when it is operated at higher operating temperatures. DFT technology provides this enhanced protection because it is active from the moment the engine is started right up to operating conditions where the oil temperature can exceed 100°C. Millers Oils XF PREMIUM oils also have increased resistance to oxidation, which limits their degradation, reduces the amount of deposits and allows to maintain optimal viscosity for a longer time.
Millers Oils

Data sheet

Density @ 20C, Relative
0.847/g/cm3 - EN ISO 12185
Flash Point, PMCC
230/°C – DIN ISO 2592
HTHS at 150°C
3.5/mPа.s - ASTM D5481
Pour Point
-42/°C - DIN ISO 3014
Quality
synthetic
TBN
8/mg – KOH/g - DIN ISO 3771
Viscosity
5w30
Viscosity index
167/DIN ISO 2909
Viscosity, Kinematic 100C
11.9/mm²/s - DIN 51 562
Viscosity, Kinematic 40C
70/mm2/s - DIN 51 562

Millers oils XF Premium C4 5w30 oils contains or meets specification:

About the brand Millers Oils

On the foundations of the company purchased in 1887 by John Watson, Miller created the Millers-Oils enterprise, which to this day is an independent family business. Since the beginning of its existence, the company has been focusing on the quality and not the quantity of the products it... read more