Ravenol GFE SAE 5W-20 CleanSynto

Ravenol GFE SAE 5W-20 CleanSynto - produced using CleanSynto technology, low viscosity - 5w20, high quality synthetic engine oil, has API SP (RC), SN+, ILSAC: GF-6A. For use where car manufacturer standards are required: GM: Dexos1 Gen 2, Ford WSS-M2C945-B1, FORD WSS-M2C960-A1, Chrysler: MS-13340, MS-6395.

Benefits Ravenol GFE SAE 5W-20 CleanSynto

  • The oil is extremely resistant to oxidation and loss of properties due to the use of synthetic base oils.
  • Low pour point provides effective engine protection against friction even during engine start-up in winter conditions.
  • A high level of protection against rust is provided by effective detergents that neutralize acidic combustion products.
  • The amount of ash-containing additives in the oil has been reduced to protect the DPF filters.
  • An important feature of this oil is low evaporation, thanks to which the need for top-ups has been reduced to a minimum.
  • The oil has technical parameters in accordance with the requirements of ILSAC GF-6A.
  • Ravenol GFE SAE 5W-20 CleanSynto compliant with manufacturers' standards:GM: Dexos1 Gen 2, Ford WSS-M2C945-B1, FORD WSS-M2C960-A1, Chrysler: MS-13340, MS-6395
  • Ravenol GFE SAE 5W-20 CleanSynto is produced using CleanSynto technology
  • Removes the causes of pre-ignition at low engine speeds.

Technology Ravenol GFE SAE 5W-20 CleanSynto

Ravenol GFE SAE 5W-20 CleanSynto uses the highest quality oil bases and a special set of additives. Clean Synto oils contain increased amounts of antioxidant, washing and dispersing additives. These additives cause that significantly less deposits and soot deposits are deposited in the engine, but also existing impurities are naturalized. The increased amount of additives allows the oil to extend its effective lubrication level before it loses its properties. All this allows you to ensure hundreds of thousands of kilometers driven without problems with the engine.
Ravenol

Data sheet

Ash, Sulphated
0.94/% wt – DIN 51 575
Density @ 20C, Relative
0.846/g/cm3 - EN ISO 12185
Flash Point, PMCC
232/°C – DIN ISO 2592
HTHS at 150°C
2.94/mPа.s - ASTM D5481
NOACK
10.8/% - ASTM D5800/b
Pour Point
-36/°C - DIN ISO 3016
Quality
synthetic
TBN
8.6/mg – KOH/g - DIN ISO 3771
Viscosity
5w20
Viscosity at -30 °C (CCS)
3650/mPa*s - ASTM D5293
Viscosity index
163/DIN ISO 2909
Viscosity, Kinematic 100C
8.6/mm²/s - DIN 51 562
Viscosity, Kinematic 40C
47.1/mm2/s - DIN 51 562

Ravenol GFE SAE 5W-20 CleanSynto oils contains or meets specification:

About the brand Ravenol

Founded in the small town of Werther in Westphalia by Hans Triebel from the beginning of its activity, it tried to offer its customers high-quality lubricants. Initially, these were monograde engine oils and industrial cleaning products. Thanks to the modernization and expansion of the... read more