Fuchs Titan Supersyn D1 SAE 5W-30

Fuchs Titan Supersyn D1 SAE 5W-30 - optimizing fuel consumption, especially recommended for GM engines, high quality engine oil, has API SN+, RC, SP/RC, ILSAC: GF-6A/GF-5. Developed for engines requiring the following specifications: GM: Dexos1 Gen 2, FORD WSS-M2C929-A, FORD WSS-M2C946-A, FORD WSS-M2C946-B1, FORD WSS-M2C961-A1, FIAT 9.55535-CR1.

Applications

  • Designed for GM engines requiring GM oil specification: Dexos1 Gen 2 and 5w30 viscosity.

Benefits Fuchs Titan Supersyn D1 SAE 5W-30

  • Synthetic oil which means better protection against friction and extended oil life.
  • The oil makes it easier to start the engine in winter at very low temperatures. Very good pumpability is the result of a very low freezing point.
  • By limiting the ash contained in the oil, the wear rate of the DPF filter has been reduced.
  • It complies with the very high technical requirements of ILSAC GF-6A.
  • Fuchs Titan Supersyn D1 SAE 5W-30 meets manufacturers specifications:GM: Dexos1 Gen 2, FORD WSS-M2C929-A, FORD WSS-M2C946-A, FORD WSS-M2C946-B1, FORD WSS-M2C961-A1, FIAT 9.55535-CR1
  • Fuchs Titan Supersyn D1 SAE 5W-30 is optimizing fuel consumption, especially recommended for GM engines
  • Prevents pre-ignition at low engine speeds.

Technology Fuchs Titan Supersyn D1 SAE 5W-30

Fuchs Titan Supersyn D1 SAE 5W-30 from the SUPERSYN family is a modern synthetic engine oil with very high lubricating parameters. The synthetic base oils used in it allowed to obtain a lubricant that is extremely resistant to high temperatures. It is the resistance to temperatures that limits the rate of oil oxidation, which causes the degradation of its properties and the formation of deposits. Another advantage of synthetic base oils is better protection of the engine against friction in a wide temperature range. Better lubrication improves engine performance and reduces fuel consumption. SUPERSYN oils also have an improved pumpability parameter, thanks to which the engine is protected almost from the first moment of start-up.
Fuchs

Data sheet

Ash, Sulphated
1/% wt – CEC L-036-90
Density @ 15C, Relative
0.853/g/cm3 - DIN 51757
HTHS at 150°C
3.11/>/=mPa.s - ASTM D5481
Pour Point
-45/°C - DIN ISO 3016
Quality
synthetic
Viscosity
5w30
Viscosity index
160/DIN ISO 2909
Viscosity, Kinematic 100C
10.4/mm²/s - ASTM DIN 51562-1
Viscosity, Kinematic 40C
61.2/mm²/s - ASTM DIN 51562-1

Fuchs Titan Supersyn D1 SAE 5W-30 oils contains or meets specification:

About the brand Fuchs

Fuchs is a company founded in 1931 in Mannheim by Rudolf Fuchs, which currently produces engine oils. In the first years of operation, Fuchs did not have its own production plants, but sold imported products. In 1936, the company started to produce its own lubricants according to proven... read more