Liqui Moly Special Tec DX1 5W-30

Liqui Moly Special Tec DX1 5W-30 - designed for General Motors and Ford engines, synthetic technology engine oil, has API SN+, SN/RC. Has a formulation that meets the standards: GM: dexos1 Gen 2, Ford WSS-M2C 946-A/Ford WSS-M2C 946-B1/Ford WSS-M2C 961-A1.

Applications

  • Specifically designed for General Motors engines and can also be used in some Ford engines.

Benefits Liqui Moly Special Tec DX1 5W-30

  • The oil retains its fluidity even at very low temperatures, which is invaluable during winter engine start-up.
  • The oil effectively neutralizes acid combustion products thanks to its very high detergent content.
  • By limiting the ash contained in the oil, the wear rate of the DPF filter has been reduced.
  • It can be used for the entire drain interval without significant top-ups as it is highly resistant to evaporation.
  • Liqui Moly Special Tec DX1 5W-30 meets manufacturers specifications:GM: dexos1 Gen 2, Ford WSS-M2C 946-A/Ford WSS-M2C 946-B1/Ford WSS-M2C 961-A1
  • Liqui Moly Special Tec DX1 5W-30 is designed for General Motors and Ford engines

Technology Liqui Moly Special Tec DX1 5W-30

Liqui Moly Special Tec DX1 5W-30 from the Special TEC line is an oil produced in synthetic technology. Products from the Special TEC line are oils created for selected engines. Each oil in this series is formulated to meet different car manufacturer standards. This approach to the production of oil made it possible to obtain a set of parameters best suited to a specific group of engines. All oils from the Special TEC line provide full engine protection, improve engine performance, and reduce fuel consumption. In addition, depending on the selected oil from this line, it may be more compatible with Start-Stop systems, safer for DPF filters, have better fluidity at low temperatures, or have another unique feature required by the engine manufacturer's specification.
Liqui Moly

Data sheet

Ash, Sulphated
0.9/% wt – DIN 51575
Density @ 15C, Relative
0.850/g/cm3 - DIN 51757
Flash Point, PMCC
220/°C – DIN ISO 2592
HTHS at 150°C
2.9/mPa.s - ASTM D5481
NOACK
9.5/% CEC-L-40-A-93
Pour Point
-45/°C - DIN ISO 3016
Quality
technosynthese
TBN
9/mg – KOH/g
Viscosity
5w30
Viscosity at -30 °C (CCS)
6600/mPa.s (cP) - ASTM D5293
Viscosity index
155/DIN ISO 2909
Viscosity, Kinematic 100C
10/mm²/s - ASTM D7042-04
Viscosity, Kinematic 40C
60/mm²/s - ASTM D7042-04

Liqui Moly Special Tec DX1 5W-30 oils contains or meets specification:

About the brand Liqui Moly

Liqui Moly is a company that produces engine oils, various types of additives and automotive cosmetics. It was founded in Germany in the town of Ulm in 1957. It owes its name to molybdenum disulfide (a chemical compound with excellent lubricating properties, which became famous as an... read more