Shell Helix Ultra SP 5W-20
Shell Helix Ultra SP 5W-20 - using active cleaning technology to prevent the formation of deposits, low viscosity - 5w20, high quality synthetic engine oil, has API SP, ILSAC: GF-6A. Provides protection for engines requiring the following specifications: GM: dexos1 Gen 2, Ford WSS-M2C945-A/Ford WSS-M2C930-A, Chrysler: MS 6395.
Benefits Shell Helix Ultra SP 5W-20
- Produced from synthetic oil bases, thanks to which the oil has a high resistance to oxidation.
- Effectively reduces friction from the first moments of a cold engine start, even at extremely low temperatures.
- Provides effective engine protection in a wide range of engine operating temperatures - has a high viscosity index.
- Meets the technical requirements for engine oil that are required by the ILSAC GF-6A standard.
- Shell Helix Ultra SP 5W-20 compatible with manufacturers' standards:GM: dexos1 Gen 2, Ford WSS-M2C945-A/Ford WSS-M2C930-A, Chrysler: MS 6395
- Shell Helix Ultra SP 5W-20 is using active cleaning technology to prevent the formation of deposits
- Designed to eliminate the phenomenon of pre-ignition at low engine speeds.
Technology Shell Helix Ultra SP 5W-20
Shell Helix Ultra SP 5W-20 form Shell Helix Ultra line oils are based on the unique PurePlus technology. This technology makes it possible to obtain perfectly pure base oil from natural gas without impurities present in crude oil. Engine oils made of such an oil base are exceptionally stable in a wide range of temperatures, have reduced evaporation, but most importantly, they provide a high level of engine protection. Shell Helix Ultra oils significantly extend engine life not only by effectively reducing friction but also by reducing the formation of oil sludge. Another advantage of using PurePlus technology is reduced fuel consumption and, consequently, lower operating costs. Shell Helix Ultra oils are more resistant to deterioration over time than standard oils due to their high temperature resistance. The last indisputable advantage is high pumpability at low temperatures, which translates into immediate protection of the engine in winter conditions.Data sheet
- Density @ 15C, Relative
- 0.837/g/ml - ASTM D4052
- Flash Point, PMCC
- 234/°C - ASTM D92
- Pour Point
- -48/°C - ASTM D97
- Quality
- synthetic
- Viscosity
- 5w20
- Viscosity at -30 °C (CCS)
- 6510/mPa.s (cP) - ASTM D5293
- Viscosity index
- 167/ASTM D22702
- Viscosity, Kinematic 100C
- 8.6/mm²/s - ASTM D445
- Viscosity, Kinematic 40C
- 45.9/mm²/s - ASTM D445