Gulf Formula RNX 5W-30
Gulf Formula RNX 5W-30 - recommended for selected engines installed in Renault, Dacia, synthetic engine oil, has ACEA classification C4. Formulated to meet the standards of car manufacturers: MB 226.51, Renault: RN 0720. Meets the requirements of DPF and TWC filters.
Applications
- Gulf Formula RNX 5W-30 has a formula that complies with the requirements diesel and gasoline engines with installed DPF filters or TWC catalysts where manufacturers recommend quality C4 and viscosity 5w30.
- Designed for selected engines fitted in Renault, Dacia where the Renault specification: RN 0720 is recommended.
Benefits Gulf Formula RNX 5W-30
- The high quality of the oil was obtained thanks to the use of synthetic base oils.
- High viscosity index means effective protection of the engine even during high operating temperatures.
- Provides very effective protection against acids resulting from fuel combustion.
- Thanks to the reduced ash content, the low-SAPS oil provides protection for the DPF filter in cars.
- Gulf Formula RNX 5W-30 meets the standards of manufacturers:MB 226.51, Renault: RN 0720
- Gulf Formula RNX 5W-30 is recommended for selected engines installed in Renault, Dacia
Technology Gulf Formula RNX 5W-30
Gulf Formula RNX 5W-30 from the Gulf Formula line is a fully synthetic advanced engine oil. Formula line oils have been developed for modern engines that began to require more and more efficient lubricants. The task of oils in this group is to ensure optimal lubrication also at high temperatures and to protect against deposits. The composition of Formula oils has been selected so that these oils do not deteriorate quickly. Thanks to this, it is possible to use longer intervals between servicing. Oils from the Gulf Formula line provide what every car enthusiast cares about - the best engine performance while maintaining high protection against friction even in extreme temperatures. In addition, these oils reduce fuel consumption and lower emissions, making them ideal products.Data sheet
- Ash, Sulphated
- 0.4/% wt - ASTM D874
- Density @ 15C, Relative
- 0.853/g/ml - ASTM D1298
- Flash Point, PMCC
- 210/°C - ASTM D92
- Pour Point
- -33/°C - ASTM D97
- Quality
- synthetic
- TBN
- 7.1/mg – KOH/g
- Viscosity
- 5w30
- Viscosity index
- 168/ASTM D2270
- Viscosity, Kinematic 100C
- 11.6/mm²/s - ASTM D445